轮机英语。
第一部分。日常用语：daily english
:问候、介绍、告别（ greetings、introductions and farewells）
1、i’m a fitter (electrician、piper ).钳工、电工、管子工。
2、he is an inspector(qc). 检验员。
3、welcome to our shipyard.
:致谢、道歉（gratitude and apologies）
1、do me a f**our, please. 请多帮忙。
2、when shall we deliver it? 提交。
3、please wait a moment.
4、will this way take me to the foreign office? 外事办。
5、right-about-face向后转。
life in the yard
1、h**e you got used to the life here?
2、please hold the handrails well. 请抓好扶手。
3、please use your intercom.（walkie-talkie）对讲机。
4、how about quality? 质量怎么样？
5、there’s something wrong with the drawing.
6、sorry, it’s my fault. 是我的过错。
7、don’t worry. that’s easy to deal with.
8、let’s start to check some items. 开始验收吧。
9、are you satisfied with it?
10、the vibration (temperature、pressure、speed) is normal. 振动（温度、压力、速度）是正常。
11、sorry, it has not been finished yet.
12、submission (delivery) is okay. 提交（验收）成功。
常用句型 common patterns
1、that is an exhaust valve. 排气阀。
2、these are blowers. 鼓风机。
3、there are ten workers in our group.
4、he is a technician. 技术员。
5、i am a fitter. 钳工。
6、when shall we h**e a check?
7、will you please give me a hand?
第二部分管子部分。
.管子加工后提交用语：delivery expressions after pipe processing
1、which system is this pipe for?
2、how many pipes are there altogether?
3、what’s the designed test pressure ? it is 12 kilograms/cm2
设计规定的试验压力是多少？ 12公斤/厘米2。
4、how about the accuracy of this pressure gauge? when did you calibrate it?
这压力表准不准确？什么时候校验的？
5、is the owner’s representative here now?船东来了没有？
6、when will the surveyors be here?验船师什么时候来？
7、h**e your inspectors checked it? any problems? 你们分厂的检验员看过没有？有什么问题？
8、the welding is uneven and needs some remedy.焊角尺寸不均匀，需要修补。
9、there is an air hole here. please scrape it and h**e a repair.这里有气孔，需挖掉后再修补。
10、there is a seizing here. reweld it please. 这里有咬口，需焊补。
11、the inside of the pipe needs grinding.管子内部需打磨。
12、the inside of the pipe needs welding and grinding. 管子内部需补焊打磨。
13、the inside of the branch pipe needs welding and grinding. 支管内部需补焊打磨。
14、please grind it once more.打磨不够，再磨以下。
15、the seam of the pipe seat is not welded thoroughly and needs welding and grinding.
管座焊缝未焊透，需补焊打磨。
16、the seam of the reducer connection is not welded thoroughly and needs welding and grinding.
异径接头缝未焊透，需补焊打磨。
17、the seam of the bend is not welded thoroughly and requires welding and grinding.
定型弯缝未焊透，需补焊打磨。
18、the welding part is too thin and needs rewelding. 电焊太薄，需补加电焊。
19、now i’ll h**e to go on board. i will h**e a check this afternoon.现在我有事需上船，下午再来检验。
20、the pressure test is over. now decrease the pressure , dismantle the pipe and check the inside of the pipe.
压力试验通过了，把压力放掉，拆开管子，检查管子内部。
21、what’s to be done after water pressure test? acid flushing or galvanizing?
水压试验后怎么处理，是酸洗还是镀锌？
22、these pipes need photoing and inspecting.这些管子需拍片和探伤。
23、i’ll check the material certificate of the pipe. 我要这管子的材质证书。
24、i’d like to see the material certificate of the flange. 我要看这法兰的材质证书。
25、these pipes h**e been checked and can be stamped.这些管子已通过验收，可以打钢印了。
26、is there any leaking here? 这里是否漏水？
. 船舶管系提交一般用语 for the delivery of the piping system
1、先生，麻烦给我看一下缺陷可以吗？sir, could you show me the defect?
2、现在可以启动泵吗？may i start the pump now?
3、我们开始做实验吧 let’s begin the test.
4、这个系统没问题吧？ is there any trouble for this system?
5、压力太低（高） the pressure is too low (high).
6、温度太低（高） the temperature is too low (high).
7、流量太小（大） the flow is too little (much).
8、真空度太小 the pressure in the vacuum is too low.
9、旁通阀关闭 the by-pass valve is closed.
10、我们到上面（下面、前面、后面）去看看。
let’s go upward (downward、forward、backward) to h**e a check.
11、能否让我叫个翻译来解释一下 shall i ask an interpreter to explain it to you?
12、你要看一下图纸吗？ would you like to h**e a look at the drawing?
13、这根管子的通径是1500mm。 the diameter of this pipe is 1500mm.
14、这个系统的原理没有问题。 the principle of this system is okay.
15、安装的位置是可以的，便于操作。 the installation position is proper and easy for operation.
16、我们会按照你的意思改一下 we’ll make a change according to your request.
17、让我们到隔壁舱室去看一下。 let’s go to the next hold (space, room, cabin) to h**e a look.
18、垫片换新 renew the washers.
19、法兰平面贴合不好。the surface of flanges don’t fit well.
20、管子镀锌 galvanize the pipes.
21、管子油漆 paint the pipes
22、螺丝扳紧 tighten the screw.
23、消防管（压载管 / 日用空气管 / 日用淡水管）密性试验。
the tightness test for fire pipes (ballast pipes / service air pipes / service pipes).
句型英语句型分析
反意疑问句 作用 对陈述句所说的事实或观点提出疑问，起证实作用，一般用于证实说话者所说的事实或观点。结构 陈述句 附加疑问句 助动词 be动词或情态动词 人称代词 步骤 看 陈述部分 时态，决定要用的助动词 be动词或情态动词。看意义 肯定 否定 前肯后否，前否后肯。eg the boy is do...
英语句型转换
六年级上学期期末测试题 句型转换专项练习。1.there is a big tree in the park.变成复数。2.i h e a sandwich and a glass of orange juice.变成复数 3.there were many chinese shops and re...
英语句型转换
句型转换 1 it was raining we went home.用so将两个句子合成一句 转换为 it was raining so we went home 2 they re worried about jim.用who针对jim提问 转换为 who are they worried ab...