新船舶英语

发布 2021-05-03 09:44:28 阅读 9056

1、船体。

56分段完工后结构完整性和焊缝检查。

inspection structure integrity and welding seam on completing no.56 block.

上层建筑完后结构完整性检查。

inspection structure integrity after completing the superstructure.

no.8 与no9分段合拢后大接头装配精确性和结构完整性检查。

checking the joint accuracy and structure integrity between no.8 and no.9 block after closed.

上层建筑合拢后结构完整性检查。

checking structure integrity of superstructure(deckhouse)after closed.

货舱口围板船上安装精度检查。

inspecting fitting accuracy of hatch coaming on berth.

货舱口围板焊接后焊缝检查。

inspecting welding seam of hatch coaming after welding.

no1压载水舱(no.15分段)气压试验(压头试验)检查。

inspection air pressure test(with water head) for no1. ballast water tank(no15 block).

上甲板冲水试验检查。

inspection hosing test for upper deck.

下水前测量船体主尺度、总长、两柱间长、型宽、型深、基线挠度。

measuring hull’s main dimensions:length overall(loa.),length between perpendiculars(lpp.

),breath molded(b. mld.),depth molded and deflection before launching.

划线后检查吃水标尺至平板龙骨之间的距离。

inspection distance between draught marks and keel plate after marking out.

吃水标志(载重线标志)安装后精确性检查。

inspecting fitting accuracy of draught mark(loadline mark).

载重线标志划线后检查尺度。

inspection dimension of loadline after marking out.

舵叶完工后检查。

checking rudder after completing(finished).

货舱舱口盖焊缝和尺度检查。

inspection welding seam and dimension of cargo hatch cover.

2、轮机内场。

螺旋桨轴(中间轴)机加工尺寸检查。

inspection machining dimension of propeller shaft(intermediate shaft or counter shaft).

检查螺旋桨轴与螺旋桨锥度接触面。

check for surface contact area(metallic contact) between stern shaft and propeller hub tapers.

舵杆机加工尺寸检查。

inspection machining dimension of rudder stock.

上舵承组装后检查。

inspection rudder carrier after assembly.

舵销机加工尺寸检查。

inspection machining dimension of rudder pintle.

舵杆、舵叶、舵销连接后中心线检查。

inspecting alignment of stock, rudder blade and pintle.

锚投掷试验和拉力试验。

lowering test and tension test of anchor.

轴系连接螺栓和孔尺寸测量。

measuring dimension of coupling bolts and reamer hole.

3、轮机外场安装(钳工)

防蚀板布置正确性检查。

inspection arrangement correctness of aluminium anodes.

船名牌(烟囱标志)安装正确性检查。

inspection installation correctness of ship’s name plate(funnel mark).

水密小舱口盖(水密门、窗)启闭灵活性检查。

flexibility and hosing test for small water tight hatch cover(water tight door and window).

货舱舱口盖密性试验(启闭试验、应急启闭试验)

tightness test(opening and closing test,emergency opening and closing test)for cargo hatch cover.

弃锚装置检查。

inspecting anchor throwing away appliance.

轴、舵系镗孔前中心线定位检查。

inspecting centerline positioning for shaft system and rudder system before boring.

轴系镗孔后光学校中检查。

optical aligned check for shaft system after boring.

艉轴管滑油液压试验。

hydraulic test for pipe for stern tube.

艉轴管前、后轴承与衬套直径测量。

measuring diameter of fore and aft stern tube bearing and bushes.

艉轴管前、后衬套压入检查。

inspection push-up load for fore and aft stern tube bushes.

螺旋桨轴与轴承间隙测量。

measuring clearance between propeller shaft & bearing.

螺旋桨压入检查。

inspection wet fitting the propeller.

艉轴密性装置的安装与密性试验。

fitting and tightness testing of propeller shaft before launching(after sea trial).

艉轴管滑油系统的投油清洗。

flushing of stern tube.

舵叶0位检查。

inspecting zero(datum) position of rudder blade.

舵装置完整性与轻便性检查。

inspecting integrity and flexibility of rudder appliance.

舵止跳块的间隙测量。

measuring clearance of rudder jumping stopper.

操舵装置完整性检查。

inspecting integrity of steering gear.

舵轴承安装间隙测量。

measuring installation clearance of rudder bearing.

舵机管路系统的投油清洗。

flushing of piping system for steering gear.

舵机系泊试验。

mooring test of steering gear.

舵机航行中操舵试验。

manoeuving test of steering gear during sea trial.

舵机应急操舵试验。

emergency manoeuving test of steering gear.

锚机管路系统的投油清洗。

flushing of piping system for windlass.

锚机安装与校中检查。

installation and alignment inspection of windlass.

锚机系泊试验。

mooring test of windlass.

锚机航行中抛起锚试验。

anchoring and weighting test of windlass on sea trial.

绞缆机完整性检查。

inspection integrity of mooring winch.

绞缆机管路系统的投油清洗。

flushing of piping system for mooring winch.

绞缆机系泊试验。

mooring test of mooring winch.

舵机(锚机、绞缆机)液压系统安全装置调整。

adjusting safety device for hydraulic system of steering gear(windlass、mooring winch).

4吨食物吊运转试验和吊重试验。

running test and hoisting test for 4t provision crane.

救生艇收放试验。

lowering and hoisting test for life boat.

救生艇航行试验。

sea trial for life boat.

舷梯(引水员梯)压重试验。

loading test of accommodation ladder(pilot ladder).

舷梯(引水员梯)和绞车收放试验。

lowering and hoisting test of accommodation ladder(pilot ladder).

货舱舱口盖启闭试验。

opening and closing test for cargo hatch cover.

货舱舱口盖应急启闭试验。

船舶常用英语

船上英语知多少?船上工具和设备 电气设备和部件 主机和辅机 各种表 各种船名 各种令 沈马的日志 目录。一 舵令英语 wheel order 二 车钟命令 engine order 三 缆令 line order 四 锚令 anchor order 五 检查及其他常用语 inspection and...

船舶常用英语

liner 定 船 tramp ship 不定 船 ship,vessel boat,craft sampan 船,船舶 艇 舢板 小船 container ship container ship ship 集装箱船 full 全集装箱船 semicontainer 半集装箱船 multipurpo...

船舶舾装英语

单一电缆托架single type cable tray 电缆盒cable box 排气管支架exh.gas pipe support sliding type 电缆围cable coaming 电缆筒cable collar 电器设备基座elec.equipment seat 电器保护罩prote...